Archives: <span>Subarino Products</span>

Allows you to fit Subaru EJ series brakes, wheels, and front suspension to your Subaru Brumby. This kit is broken up into several smaller kits, they can be purchased individually or all together. Some kits may not be applicable to your build.

This product is not available… yet!

Allows you to lift your Subaru L-Series 2 inches without effecting the geometry of your steering or suspension. This improves the ground clearance of the body of the car as well as the departure and approach angles. It also allows you to fit larger tyres.

The spacer kit is designed to affectively increase the length of your radius rod pushing your wheels forward approximately 15mm. This assists in the fitting of larger wheels with less scrubbing and/or body work required. Commonly when larger wheels are installed on a Subaru Brumby or L-series the firewall side of the front wheel arch … Continued

When fitting an EJ engine to a Subaru Brumby or L-series the ECU may require a speed sensor signal to function properly. When doing a conversion using the factory gear box you will find there is no electronic speed output to get this reading. This module converts a GPS signal to an electronic speed signal … Continued

With most EJ engine conversions, the most daunting task is generally the wiring. We are experts at the wiring required to complete an EJ conversion. We do not supply the entire harness, however, we do modify the harness from your donor car to suit your needs. You will need to ship us your donor harness … Continued

A common fault with most common 14-inch aftermarket rims on Subaru Brumbys or Subaru L-series is some customers experience the wheels being unbalanced resulting in intermittent shaking of the steering wheel or a rough ride. This can be corrected by fitting a hub centric ring to perfectly centre your rim to the hub.    

Give your car the ultimate offroad edge. This American-made mechanical locker was originally designed for newer Subarus with an R160 diff. With some variation to the installation steps, it can be used in Subaru Brumbys and L-series. The nature of the locker means it’s completely disabled when in 2WD and in 4WD when no torque … Continued

Allows you to bolt your Subaru Liberty, Impreza, Forester, Outback engine onto a EA gearbox as found in Subaru Leone, L-series or Brumby. Commonly used when fitting newer engines to older Subarus while maintaining the original gear box and drive train.

A common fault with Subaru Brumbys is that the indicators do not cancel when straightening the steering wheel after leaving a corner. This is a replaceable part within the indicator stalk.